Disclosure: I may earn a commission if you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Official software should be confirmed on the maker's site. Gear links may also point to StageStock. Full disclosure
Genre build
Trap
808-led low end, crisp closed hats in fast subdivisions, sparse melodic layers, and vocals that sit on top of a hard, modern drum picture.
Tempo tendencies: Often 60–80 BPM in half-time feel (or 120–160 if you count the hats). The pocket is usually a slow pulse with fast surface motion. Keys & harmony: Minor keys dominate. Melodies are often short, minor-scale or pentatonic figures. Leave space — one motif is enough.
Instruments & sounds
- An 808 or similar sine-like bass that carries both kick weight and bass notes, often pitched and sometimes distorted on the peaks.
- A hard, short snare or clap on 3 (in half-time), with occasional rolls and layered samples.
- Hi-hats in 1/8, 1/16 and 1/32 patterns, with pitch and timing variation so they don't feel like a grid dump.
- A sparse melodic layer: a dark bell, a slightly detuned synth, a filtered sample, or a guitar stab — not a full chordal arrangement unless the song asks for it.
- Vocals with autotune or pitch correction as an aesthetic when that's the style, plus ad-libs as their own, drier layer.
Arrangement
- The drop is usually a subtraction: pull hats or melody, then return. Don't add a new pad on every repeat.
- Leave bars of near-empty 808 and vocal. Density is a spice, not the base.
- If you use a sample, arrange around it rather than stacking three more harmonic layers in the same range.
EQ
- Decide whether the 808 or a separate kick owns the lowest octave. Sidechain or clip one against the other so they don't phase into mush.
- Hats and snares need a clean top without shredding the vocal sibilance.
- High-pass atmospheric pads aggressively. The low end is not their job.
Compression
- Sidechain or envelope-duck the 808 or the pad from the kick/snare if the low end smothers transients.
- Don't squash the 808 into a click; a clipper or saturator often controls peaks better than a heavy compressor.
- Vocal chains can be aggressive and modern: series compression, de-essing, and a limiter are common.
Saturation & tone
- Distortion on the 808 (often just the mid range, blended) is a core texture.
- A little clipper on the drum bus or mix bus is common; stop when the hats get crunchy.
Reverb & delay
- Short, bright rooms or plates on snares and ad-libs; a longer, darker hall on a vocal throw or a melody tag.
- Use delay throws on the last word of a line more often than a constant wash.
Bus processing
- 808/bass, drums, melody, lead vocal, ad-libs. Control the 808 on its own bus so the rest of the mix can stay crisp.
- A mix-bus clipper plus a limiter is a typical finishing shape. Leave true-peak headroom for the encode.
Mastering targets
- This genre is often delivered loud, but a crushed 808 is a failed master. Watch true peaks — 808s create inter-sample peaks easily.
- Check the mix on small speakers and in a car: if the hook is only in the sub, it will vanish. If the sub disappears on a phone, add mid-bass identity to the 808.
- Don't assume -14 LUFS; many contemporary releases are louder. Still leave true-peak headroom (often -1.0 dBTP or more) for streaming encodes.
How-to notes by DAW
- FL Studio: This is home turf: the Piano Roll for 808 slides, the Channel Rack for hat rolls, and a mixer bus with a saturator and limiter on the 808. Producer Edition or higher if you're recording vocals.
- Ableton Live 12: Use a simpler or a sampler for 808 slides (pitch envelopes or automating a pitch device). Follow the 808 with a saturator and a utility sidechain. Session View is ideal for dropping elements in and out.
- Logic Pro: Quick Sampler and Step Sequencer cover 808s and hats. Use a track stack for drums and a separate stack for the 808 so you can bounce and check phase.
- GarageBand: You can sketch a trap song here, but you'll feel the ceiling on 808 control and vocal chains. Move the project to Logic when the low end needs more surgery.
Written for Breakin' the DAW, November 20, 2026.